Stainless Steel Aging Tank for Milk/Beverage
|FOB Price:||US $2,600-30,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $2,600-30,000/ Piece|
|Transport Package:||Wooden Case/Wooden Support/ Iron Support|
|Payment Terms:||L/C, T/T, Western Union, Money Gram|
- Model NO.: ZZCG
- Power Source: Electric
- Application: Milk, Yogurt
- Heating Source: Steam/Hot Oil
- Material: Ss304/Ss316L
- Voltage: 220V, 415V ,380V, 440V
- Trademark: CHINZ
- Origin: China
- Process: Thermal Processing
- Certification: CE, ISO9001
- Customized: Customized
- Cooling Source: Cooling Water
- Mixing Type: Impeller Type
- Insulation: Rock Wool / PU
- Specification: ISO, CE
Cooling and heating tank (also named aging tank) with features such as energy saving, sound attenuation, corrosion resisting, and the advantages of strong production capacity, easy clean, widely used in the dairy industry, food, pharmaceutical, chemical, beverage and other industries, for heating, cooling, heat preservation, sterilization or slurry storage necessary stainless steel storage tank, especially suitable for the pasteurized milk and heat preservation, is a necessary equipment in ice cream production line.
According to medium can be steam type cooling and heating tank, electric type cooling and heating tank;
According to material inlet&output can be opening type cooling and heating tank, sealing type cooling and heating tank;
According to structure can be normal type, top&bottom conical type, top&bottom seal head type;
Structure and function:
Structure: include inner cylinder, jacket, insulation later, outer cladding,agitator motor, stirring paddle, thermometer, etc.
Inner cylinder : adopt high quality SS304 or SS316L, with mirror polishing.
Jacket: use high quality SS304 dimple jacket, cooling water get in from bottom and get out from top, with good cooling/heating effect.
Insulation: use PU, mineral wool, with good insulation effect.
Mixing device: Pin-cycloidal gear planetary reducer , Fixed on the beam in the brackets, Gear wheel connecting shaft and impeller, using loop connection, easy disassembling and cleaning.
Thermometer: Can display the bottom material temperature.
|Heating area |
Operation and maintenance:
Introductions: Before using, should use hot clean water wash the tank inside, then use steam sterilization. Material get in from inlet or open lid pour material directly , the material should not be too full, in order to avoid material spill when stirred by mixer, thereby causing loss to the environmental health or not.
Heating way: when heating, must close cooling medium, and discharge the jacket remaining cooling medium, then put in material, and start up agitator, and then open steam valve, when up to qualified temperature, should close steam valve first, after - 2-3mins, then close agitator.
Cooling way: close steam valve, discharge the jacket remaining steam condensate water, then open cooing medium through jacket to cool the material temperature.
Insulation: According to required temperature, insulation material can be PU or mineral wool.
Clean: Finish processing, discharge the jacket residual condensate , as soon as possible with warm water wash, brush off the thick paste material, and with 40 ~ 50 c c alkaline clean the inner wall of the tank, use clean water to rinse, for next time use, with hot water or steam (90 c) above, keep 2 ~ 3 minutes disinfects processing.
Often should pay attention to the whole equipment and the performance of the gear reducer, gear reducer lubricating oil shortage, shall be immediately added oil change once half a year (40 # engine oil), when the equipment no working, be sure to rinse with warm water jacket, in order to avoid salt water corrosion, scrubbing away cylinder body, keep the exterior clean, inner light,to achieve the purpose of durability.
More pictures for reference: